• Auto-boot-on-error

    Automatic boot open Mondeo MK4 hatchbackC H A P T E R 6 – Diagnostic Tools – … – About the Diagnostic Tools. Sun provides a wide spectrum of diagnostic tools for use with the Sun Fire V490 server. These tools range from the formal–like ……

    General – OpenBoot PROM (OBP) Commands – Shrubbery Networks – The auto-boot-on-error? NVRAM variable is used to allow the system to attempt to boot if POST fails and auto-boot? is true. … OpenBoot 2.x Command Reference Manual, 802-3241. Open Boot PROM 2.0 Command Reference, 800-6076.

    auto-boot-on-error? = true diag-level = max verbosity = max diag-script = normal diag-trigger =error-reset power-on-reset input-device = rsc-console output-device = rsc-console diag-device=rootdisk rootmirror 2) take a power recycle or reboot os …

    auto-boot-on-error?=false watchdog-reboot?=false boot-file: data not available. boot-device=disk net Hana–Hana Skoumalova Charles University, Faculty of Arts Institute of Theoretical tel: +420 221619752 & Computational Linguistics (UTKL) fax: +420 221619753 …

    auto-boot-on-error? true true error-reset-recovery sync sync load-base 16384 16384 auto-boot? false true network-boot-arguments … If you’re looking for Solaris help, sign up and take advantage of 11,103 UNIX professionals who are here to help you. Related. Discussions.

    auto-boot-on-error? diag-trigger OBP commands covered in this chapter include: asr-enable asr-disable .asr UPA Probing. Sun Enterprise 250 servers, like all UltraSPARC-based systems, are based on the high-speed Ultra Port Architecture (UPA) bus, a switched system bus that provides up to 32 port …

    Recently I got my hands on a piece of oldish SUN equipment (SunFire V210/V240). It was in an ok condition. Not perfect, but still usable and I will be able ……

    TABLE 10-2 NVRAM Parameter Configuration Commands ; Command Description printenv parameter. Displays the current value for the parameter. If no parameter ……

    … false output-device ttya screen input-device ttya keyboard load-base 16384 16384 boot-command boot boot auto-boot? true true auto-boot-on-error? false false watchdog-reboot? false false diag-file diag-device net net boot-file boot-device disk: …

    On solaris 9 there was a parameter “auto-boot-on-error?” but it does not exist in solaris 10. Is there something else to do in solaris 10 ? (I join the result of the command eeprom|sort in the attached file) Thanks for your answers. Attached Files.

    Rebooting with command: boot cdrom Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args: Evaluating: Can’t open boot device…

    These NVRAM parameters contain values that determine the startup configuration of your workstation. You can modify or reset the parameter values by using commands from the ok prompt, … auto-boot-on-error? false false error-reset-recovery …

    auto-boot-on-error?=true. load-base=16384. auto-boot?=true. network-boot-arguments: data not available. boot-command=boot. … How to upgrade Oracle 10g to 11g R2 on Solaris 10 – Part 2/3; Archives. April 2013 (1) February 2013 (1) October 2012 (1) January 2012 (3) December 2011 (3)