• Auto-boot-on-error Solaris

    #12 Sun: Static Network Settings on SolarisC H A P T E R 10 – NVRAM – Oracle … – While the workstation is in the Safe NVRAM mode, some of the NVRAM configuration parameters are reset to their default values. The reset parameters include ……

    Solaris 10 tips – FASTLINK.COM – … At the ok prompt, type: ok setenv auto-boot? true ok setenv auto-boot-on-error? true or 2b) When logged in as root: # cd /usr/platform/`uname -i`/sbin # ./eeprom (to view the settings) # ./eeprom auto-boot?=true # ./eeprom auto-boot-on-error?=true 3) … For some reason Solaris 10 …

    auto boot sparc – Nesat.net. auto boot sparc, auto boot sparc, Solaris SPARC Boot Sequence. The following represents a summary of the boot process for a Solaris 2.x … … Solaris 10 – copying a disk … ok setenv auto-boot? true ok setenv auto-boot-on-error? true or …

    Recently I got my hands on a piece of oldish SUN equipment (SunFire V210/V240). It was in an ok condition. Not perfect, but still usable and I will be able ……

    I had a hard drive failure on my Solaris 10 Sparc V440 server. … auto-boot-on-error? true true error-reset-recovery sync sync load-base 16384 16384 auto-boot? false true … If you’re looking for Solaris help, …

    View and Download Sun Microsystems Sun Fire V890 owner’s manual online. Sun Fire V890 Server pdf manual download….

    Finding/setting nvalias (nvram) OBP settings from a running Solaris O/S. Using the command eeprom (1m) while in the Solaris O/S on SPARC platforms has been ……

    Hi all, I have a server SUN FUJITSU in solaris 10 ; … On solaris 9 there was a parameter “auto-boot-on-error?” but it does not exist in solaris 10. Is there something else to do in solaris 10 ? (I join the result of the command eeprom …

    auto-boot-on-error?=true. load-base=16384. auto-boot?=true. network-boot-arguments: data not available. boot-command=boot. boot-file: data not available. … Solaris 9; Tags: eeprom, nvram, open solaris, oracle, solaris 10, solaris 9; Tag Cloud.

    auto-boot-on-error?: ‘false’ auto-boot?: ‘false’ network-boot-arguments: boot … 11.] Label the new (replacement) disk (i.e. c1t0d0) using the Solaris format utility. Label the new disk using format # format c1t0d0 selecting c1t0d0 [disk formatted] FORMAT MENU:

    The NVRAM module uses a SEEPR OM chip. … auto-boot-on-error? false. Value of false disables autoboot upon error. error-reset-recovery. … It is possible to display and change NVRAM configuration parameters from the Solaris OS by using the eeprom command.